LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Tucson N Line, Eng CD G4EN, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Except HEV) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
    G14676806Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ETC Module (A) after loosening the mounting bolt.

    Electronic throttle body Installation bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

    Fig 1: ETC Module Components Location
    G14676807Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals