Console Temperature Control Actuator: Inspection

WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF.
Disconnect the console temperature control actuator and console ON/OFF actuator connector.

Verify that the console temperature actuator and console ON/OFF actuator operates to the cool position when connecting 12V to terminal 7 and grounding terminal 3.

Verify that the temperature control actuator operates to the warm position when connected in reverse.

Courtesy of HYUNDAI MOTOR AMERICA

CONSOLE TEMPERATURE ACTUATOR DESCRIPTION

Terminal	Function
1	-
2	-
3	Warm position
4	Sensor ground
5	Feedback signal
6	Sensor power (+5V)
7	Cool position (Console OFF)

CONSOLE TEMPERATURE ACTUATOR A DESCRIPTION

Terminal	Function
1	-
2	-
3	Warm position
4	Sensor ground
5	Feedback signal
6	Sensor power (+5V)
7	Cool position

CONSOLE ON/OFF ACTUATOR DESCRIPTION

Terminal	Function
1	-
2	-
3	Console (OFF)
4	Sensor ground
5	Feedback signal
6	Sensor power (+5V)
7	Cool position (Console ON)

Connect the console temperature control actuator and console ON/OFF actuator connector.
Turn the ignition switch ON.
Check the voltage between terminal 4 and 5.
If the measured voltage is not within specification, substitute with a known-good console temperature actuator and console ON/OFF actuator and then check for proper operation.
Replace the console temperature actuator and console ON/OFF actuator if it is proved that there is a problem with it.