Liftgate Latch: Replacement
WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
- Wear gloves to protect hands from injury.
- Disconnect the negative (-) battery terminal.
- Remove the Liftgate lower trim.
(Refer to Liftgate - "LIFTGATE TRIM ")
- Disconnect the Liftgate latch connector (A).
- Loosen the mounting bolts, remove the liftgate latch assembly (A).
Tightening torque:
21.6 - 26.5 N.m (2.2 - 2.7 kgf.m, 15.9 - 19.5 lb-ft)
- To install, reverse removal procedure.
Information
- Make sure the liftgate locks/unlocks and opens/closes properly.
- Make sure the connectors are connected in properly.