LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Santa Fe SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Transfer Assembly) >> Transfer Case Assembly >> Installation

Transfer Case Assembly: Installation

WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedures.
    CAUTION: In case of replacing the controller (ECU) and transfer case due to changing characteristics of the frictional materials inside the transfer case, it is necessary to check and enter the calibration data.
    • In case of replacing the ECU only, perform the clutch learning back-up and writing in the new transfer case ECU using diagnostic tool equipment.

    (Refer to 4 Wheel Drive (AWD) system - "ADJUSTMENT ")
scientia non olet · About LEMON Manuals