LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Santa Fe SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Automatic Transmission Control System - 2.5L) >> Transmission Control Module (TCM) >> Installation

Transmission Control Module (TCM): Installation

WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedures.
  2. Perform the oil pressure characteristics backup procedure using the diagnostic tool when replacing with a new TCM.
    G14764283Courtesy of HYUNDAI MOTOR AMERICA
    G14764284Courtesy of HYUNDAI MOTOR AMERICA
  3. In order to avoid any problem including sense of starting delay of the transmission and shock at acceleration and vehicle start, make sure to process learning for TCM after replacing the transmission/TCM.

    (Refer to Automatic Transmission Control System - "ADJUSTMENT ")

    CAUTION:
    • After inspecting and replacing the oil level, make sure to remove all the transmission oil in the outside of the automatic transmission (In particular, remove the residual transmission oil between the transmission case and oil pan). Sure to remove the transmission oil of the automatic transmission's outside.