Removal And Installation
WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.
- Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
- Disconnect the boost pressure sensor connector (A).
- Remove the mounting bolts (B), and then remove the boost pressure sensor.
Tightening torque:
9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb-ft)
- Install in the reverse order of removal.