Boost Pressure Sensor (BPS): Inspection
WARNING: This page is about a different car, the 2022 Genesis GV70. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the wave form of BPS using diagnostic tool.
- Measure the output voltage of the BPS during idle with IG ON.
| Pressure [kPa (kgf/cm2 , psi)] |
Output Voltage (Vref = 5V) |
|---|---|
| 10 (0.10, 1.45) | 0.5 |
| 40 (0.40, 5.80 | 0.9 |
| 80 (0.81, 11.60) | 1.5 |
| 120 (1.22, 17.4) | 2 |
| 160 (1.63, 23.20) | 2.6 |
| 200 (2.03, 29.00) | 3.1 |
| 220 (2.24, 31.90) | 3.4 |
| 240 (2.44, 34.80) | 3.7 |
| 280 (2.85, 40.61) | 4.2 |
| 300 (3.05, 43.51) | 4.5 |