LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Elantra N Line >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L (Except HEV) >> Electric WGT Control Actuator >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the intercooler inlet pipe.

    (Refer to Engine Mechanical System - "INTERCOOLER ")

  4. Disconnect the EWGA connector (A).
    G14596440Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the shaft link assembly (B) after removing the C-ring (A).
    G14596441Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the EWGA after removing the bolts (A).

    Tightening Torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

    G14596442Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals