LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Elantra N Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transaxle Control System) >> Control Shaft Complete >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
    NOTE:
    • When installing, set control shaft lever to neutral position.
    • When installing, apply the sealant as shown in the illustration below.

    Specified sealant  :LOCTITE 5060
    G16177217Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals