LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2022 >> Santa Cruz SE, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 2.5T) >> Engine Control Module (ECM) >> Repair Procedures >> Adjustment >> [When Installing An ECM With Learning Experience]

[When Installing An ECM With Learning Experience]

WARNING: This page is about a different variant/trim than selected.
  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - " NEUTRALIZING OF ECM  ") 

  2. After finishing "ECM Neutral Mode", perform "Key teaching" procedure with diagnostic tool.

    (Refer to Body Electrical System - " KEY TEACHING PROCEDURE  ") 



  1. Perform "ECM Neutral Mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "NEUTRALIZING OF ECM ")

  2. After finishing "ECM Neutral Mode", Use a key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.

    (Refer to Body Electrical System - "SMART KEY ")

scientia non olet · About LEMON Manuals