LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Venue SEL >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install in the reverse order of removal.
  3. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  4. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  5. Check the front alignment.

    (Refer to Suspension System - "ALIGNMENT ")

scientia non olet · About LEMON Manuals