LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Venue SE >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil >> Repair Procedures >> Removal and Installation

Removal and Installation

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connectors (A).
  4. Remove the ignition coil after loosening the mounting bolts (B).

    Ignition coil mounting bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

    G14694271Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
      G14694272Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals