LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Venue Denim >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) And Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Do not turn the ignition switch ON and do not contact the battery cable while replacing the front impact sensor.
  1. Install the new front impact sensor.
  2. Connect the front impact sensor connector.
  3. Install the front impact sensor mounting bolt.

    Tightening torque: 

    6.8-7.5 N.m (0.7-0.76 kgf.m, 5.0-5.5 Ib-ft)

  4. Reconnect the battery negative cable.
  5. After installing the Front Impact Sensor, confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
scientia non olet · About LEMON Manuals