LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster N Standard Trans >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch System >> Concentric Slave Cylinder Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Install the concentric slave cylinder bolts. Not to be bent or twisted, Tighten them in diagonal directions.
  • When it is assembled, it must be free from invasion foreign matters and oil leakage.
  • Do not let grease or oil contaminate the bearing or activating area of the Concentric Slave Cylinder. (Abnormal slip may cause noise/abrasion while driving.)
  1. To install, reverse the removal procedure.
  2. Perform bleeding air procedure in the clutch system. (Refer to Clutch System - "REPAIR PROCEDURES ")
scientia non olet · About LEMON Manuals