Repair Procedures: Reassembly: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
The already adopted seam for controlling the inner bearing on the front differential assembly is used. (Use the same thickness controlling seam in case of destruction)
The rear differential assembly shall be replaced with new one when the differential carrier or differential case assembly is failed. The noise or vibration can be made due to the no matching of current inner bearing and gear control seam when the carrier or differential case assembly is exchanged as a unit.
The rear differential assembly shall be replaced with new one when the differential carrier or differential case assembly is failed. The noise or vibration can be made due to the no matching of current inner bearing and gear control seam when the carrier or differential case assembly is exchanged as a unit.