LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Tucson Value, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (3 Of 3) >> DTC P064D-00: Internal Control Module O2 Sensor Processor Performance Bank 1 >> Wiring Inspection >> Terminal and connection Inspection

Terminal and connection Inspection

  1. Disconnect the PCM connectors and inspect for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Reconnect the connectors.
  2. Connect the GDS and go to "Current Data  ".
  3. Monitor PCM values in Current Data, check and wiggle the harness(es), connector(s), and terminal(s).
  4. Any change in the values indicates a poor connection. Was a connector problem found?

    YES 

    NO 

    • Go to next step as below.
scientia non olet · About LEMON Manuals