Repair Procedures: Installation
- Install the blind-dpot radar unit and bracket.
Tightening torque:
Blind-Spot Radar Unit bracket: 3.9 - 5.9 N.m (0.4 - 0.6 kg cm, 2.9 - 4.4 lb-ft)
Blind-Spot Radar Unit unit: 2.5 N.m
- Install the rear bumper.
- Connect the negative (-) battery terminal.
NOTE:
- Take care not to confuse left side (master) and right side (slave) unit when installing.
- BSD units connector connect to the wiring connector.