LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Tucson Value, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Automatic Transaxle Control System - 2.4L) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn off the ignition switch.
  2. Remove the battery and tray.
  3. Disconnect the solenoid valve connector (A).
    G13035369Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure the resistance between solenoid valve signal terminal and ground terminal.
  5. Check that the measured resistance is within the specification.
scientia non olet · About LEMON Manuals