Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnect the SBW control unit (SCU) connector (A).
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Loosen the nuts and then removing the SBW control unit (SCU) and bracket (A) at the same time.
Tightening torque:
9.8 - 11.7 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.6 lb.ft)
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Loosen the nuts and then removing the SBW control unit (SCU) (A).
 Courtesy of HYUNDAI MOTOR AMERICA
|