LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Santa Fe Calligraphy, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Control System - 2.5L (Except HEV)) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2022 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine coolant temperature sensor (ECTS).

    (Refer to Engine Coolant Temperature Sensor (ECTS) - "REMOVAL ")

  2. After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS terminals 1 and 2.
  3. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals