LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Santa Fe Calligraphy, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.5T (Except HEV) >> Canister Close Valve (CCV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF.
  2. Disconnect the canister close valve (CCV) connector.
  3. Measure resistance between the CCV terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

  5. Disconnect the vapor hose connected to the canister from the CCV.
  6. Connect the vacuum pump to the nipple.
  7. Ground the CCV control line and apply battery voltage to the CCV power supply line.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals