Repair Procedures: Removal: Notes

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery (-) terminal.
Remove the oxygen sensor (B) after disconnect the Connector (A).
NOTE:
- Note that the SST (Part No.: 09392-2H100 or 09392-1Y100) can be used for removing the heated oxygen sensor.
Tightening torque:

35.3 - 45.1 N.m (3.6 - 4.6 kgf.m, 26.0 - 33.3 lb-ft)