LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Windshield Wiper/Washer System) >> Front Washer Motor >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reassemble the washer reservoir.

    Tightening torque (Bolt): 

    3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lbf.ft)

    NOTE:
    • Before installing the pump motor, check the filter for foreign material or contamination. if necessary, clean the filter into the pump motor.
  2. Install the washer lever sensor and washer motor.
  3. Connect the washer motor connector and washer hose.
  4. Install front bumper cover.
scientia non olet · About LEMON Manuals