LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Air Conditioning System) >> Photo Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Using a remover and remove the center speaker grill (A).
    G15480144Courtesy of HYUNDAI MOTOR AMERICA
  3. Separate the photo sensor connector (A) and security sensor connector (B).
    G15480145Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the photo sensor (A).
    G15480146Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.

    Information 

    • Make sure the hood latch release cable is connected properly.
    • Replace any damaged clips (or retainers or fasteners).