Repair Procedures: Replacement
WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
- Put on gloves to prevent hand injuries.
- Plug or cap the lines immediately after disconnecting them to avoid moisture and dust contamination.
- Disconnect the battery (-) terminal.
- Remove the crash pad center panel. (Refer to Body (Interior and Exterior) - "CRASH PAD CENTER PANEL ")
- Loosen the mounting screws and then remove the in-car sensor (A).
- Install in the reverse order of removal.