LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Timing System >> Drive Belt >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Check belt for maintenance and V-ripped part for abnormal wear. Replace if necessary.

NOTE:
  • Do not bend, twist or turn the drive belt inside out.
  • Do not allow the drive belt to come into contact with oil, water and steam.

Visually check the belt for excessive wear, frayed cords etc.

If any defect is found, replace the drive belt.

NOTE:
  • Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.
    G14423142Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals