LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System >> Radiator >> Repair Procedures >> Inspection >> Radiator Cap Testing

Radiator Cap Testing

  1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
    G14423436Courtesy of HYUNDAI MOTOR AMERICA
  2. Apply a pressure of 93.16 - 122.58 kPa (0.95 - 1.25 kg/cm2 , 13.51 - 17.78 psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About LEMON Manuals