LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Palisade Calligraphy, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Front Wheel Transfer Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the sub frame.

    (Refer to Suspension System - "SUB FRAME ")

  3. Remove the front drive shaft assembly. [Right side] 

    (Refer to Driveshaft and Axle - "FRONT DRIVESHAFT ")

  4. Remove the front muffler.

    (Refer to Engine Mechanical System - "MUFFLER ")

  5. Remove the front propeller shaft assembly (A) from the transfer assembly.

    Tightening torque: 

    49.0 - 68.6 N.m (5.0 - 7.0 kgf.m, 36.2 - 50.6 lb-ft)

    G14424382Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the transfer case assembly.

    Tightening torque: 

    60.8 - 65.7 N.m (6.2 - 6.7 kgf.m, 44.8 - 48.5 lb-ft)

    1. 1) Loosen the transfer assembly upper mounting bolts (A).
      G14424383Courtesy of HYUNDAI MOTOR AMERICA
    2. 2-1) Loosen the transfer assembly lower mounting bolts (B). [Transfer ->Transaxle]
      G14424384Courtesy of HYUNDAI MOTOR AMERICA
    3. 2-2) Loosen the transfer assembly lower mounting bolts (B). [Transaxle -> Transfer]
      G14424385Courtesy of HYUNDAI MOTOR AMERICA
    4. 3) Remove the transfer assembly (C).
      G14424386Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals