LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Palisade Calligraphy, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (HYUNDAI Digital Key System) >> Identity Authentication Unit (IAU) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Be careful not to scratch the door trim and other parts.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center panel. (Refer to Body - "CRASH PAD CENTER PANEL ")
  3. Disconnect the IAU connector (A).
    G15480058Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the IAU (A) after removing the nuts.
    G15480059Courtesy of HYUNDAI MOTOR AMERICA