LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Kona SE, FWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Wheel >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Turn the steering wheel so that the front wheels can face straight ahead.
  3. Remove the driver airbag module.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  4. Disconnect the steering wheel connector (A).
  5. Remove the steering wheel lock bolt (B) and then separate the steering wheel from the steering column.

    Tightening Torque: 

    44.1 - 49.0 N.m (4.5 - 5.0 kgf.m, 32.5 - 36.2 lb-ft)

    G12602343Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Do not reuse the steering lock bolt.
    • When assembling, match the gear teeth as the below image.
      G12602344Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals