LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Kona SE, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the oil filler plug (A).

    [Gasoline 1.6] 

    G12605703Courtesy of HYUNDAI MOTOR AMERICA

    [Gasoline 2.0] 

    G12605704Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the oil level.
  4. Oil level must be up to fill the hole, if not, add oil until it runs over.

    [Gasoline 1.6] 

    G12605705Courtesy of HYUNDAI MOTOR AMERICA

    [Gasoline 2.0] 

    G12605706Courtesy of HYUNDAI MOTOR AMERICA
  5. Install the oil filler plug with a new gasket.

    Tightening Torque: 

    39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)

  6. Install the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")