Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the coupling from the vehicle.

(Refer to 4WD System - "DIRECT ELECTRO HYDRAULIC ACTUATOR COUPLING ")

NOTE:

Keep it level with the sticker (A) on the top of the coupling.

G12605760

Courtesy of HYUNDAI MOTOR AMERICA

Disconnect the extension cable (A).

Courtesy of HYUNDAI MOTOR AMERICA
Remove the pressure sensor (A) with 24mm socket.
NOTE:
- Keep going horizontal state to prevent leaks during remove the pressure sensor.
Tightening Torque:

7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA