LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Transfer Assembly) >> Front Wheel Transfer Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedures.
    NOTE:
    1. Be careful not to damage the O-ring (A), If the O-ring is damaged, replace with a new one.
    2. Smear and cover splines (B) with molybdenum type high pressure grease.

      GREASE: SPL-1 or equivalent

      [Gasoline 1.6] 

      G12605716Courtesy of HYUNDAI MOTOR AMERICA

      [Gasoline 2.0] 

      G12605717Courtesy of HYUNDAI MOTOR AMERICA
    3. Install the propeller shaft to be near runout marking (transfer assembly 1ea, propeller shaft 1ea) each other.
      G12605718Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals