Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Using the GDS, check the input/Output Speed Sensor Waveforms.
- Turn OFF the Ignition Switch.
- Connect the GDS to the Data Link Connector (DLC) on the lower crash pad.
- Ignition "ON" & Engine "ON".
- Check the Input/Output Speed Sensor Waveforms at high speed and low speed.
(1) Input/Output Speed Sensor At Low Speed

Courtesy of HYUNDAI MOTOR AMERICA

(2) Input/Output Speed Sensor At High Speed

Courtesy of HYUNDAI MOTOR AMERICA