LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Accent SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Clutch System) >> Ignition Lock Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ignition lock & clutch switch connector (A).
    G14077102Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the ignition lock & clutch switch (A) after loosening the bolts (B).
    G14077103Courtesy of HYUNDAI MOTOR AMERICA
    G14077104Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals