LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Accent SE, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Side Airbag (SAB) Module >> Repair Procedures >> Installation

Repair Procedures: Installation

CAUTION:
  • Be sure to install the harness wires not to be pinched or interfered with other parts.
NOTE:
  • Do not open the lid of the side airbag cover.
  • Make sure that the airbag assembly cover is installed properly. Improper installation may prevent the proper deployment.
  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes.
  3. Install the side airbag.
  4. Install the front seat back cover.

    (Refer to Body - "FRONT SEAT BACK COVER ")

  5. Install the front seat assembly.

    (Refer to Body - "FRONT SEAT ASSEMBLY ")

  6. Recline and slide the front seat forward fully, make sure the harness wires are not pinched of interfering with other parts.
  7. Reconnect the battery negative cable.
  8. After installing the side airbag (SAB), confirm proper system operation:
scientia non olet · About LEMON Manuals