Repair Procedures: Removal
- Remove the rear-LH wheel, tire, and the inner wheel house.
- Disconnect the fuel filler hose (A).
- Disconnect the ventilation hose (B) and leveling hose (C).
- Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
Filler-neck assembly bracket installation screw:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
- Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolts (A).
Filler-neck assembly installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)