LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Veloster 2.0, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Liftgate Assembly >> Liftgate Trim >> Repair Procedures >> Replacement >> Liftgate Upper Trim

Liftgate Upper Trim

CAUTION:
  • Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Take care not to scratch the body surface.
  1. Using a screwdriver or remover, remove the liftgate upper trim (A).
    G13053648Courtesy of HYUNDAI MOTOR AMERICA
  2. To install, reverse of replacement procedure.

    Information 

    • Replace any damaged clips (or pin-type retainers).