LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Tucson Value, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Propeller Shaft Assembly) >> Propeller Shaft >> Repair Procedures >> Inspection >> Propeller Shaft Run-Out

Propeller Shaft Run-Out

WARNING: This page is about a different variant/trim than selected.
  1. Install a dial indicator with its needle on the center of front propeller shaft or rear propeller shaft.
  2. Turn the propeller shaft slowly and check the runout. Repeat this procedure for the other propeller shaft.

Front Propeller Shaft Run-Out:  0.3 mm (0.012 in.)

G13021508Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals