LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B).
  5. Remove the fuel tank air filter after removing the mounting nut (C).
    G13021007Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figures below.
    G13021008Courtesy of HYUNDAI MOTOR AMERICA
    G13021009Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals