Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnect the battery negative (-) terminal.
- Open the cap and then remove the accelerator pedal module (A) after loosening the mounting bolt.
Tightening Torque:
8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Disconnect the accelerator pedal connector (A).
 Courtesy of HYUNDAI MOTOR AMERICA
|