LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> Bank 1/Sensor 2

Bank 1/Sensor 2

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the connector (A), and then remove the sensor (B).
    G13039461Courtesy of HYUNDAI MOTOR AMERICA
    G13039462Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals