LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Palisade SE, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (9 Of 9) >> DTC U012D-00: Lost Communication With Generator Control Module >> DTC Information and Inspection >> Monitor Current Data

Monitor Current Data

  1. Ignition "OFF"
  2. Connect GDS to Data Link Connector (DLC).
  3. Ignition "ON" & Engine "ON"
  4. Monitor following parameters in "Current Data" with GDS.

    Specification:  Refer to illustration shown below

    G14460972Courtesy of HYUNDAI MOTOR AMERICA
    G14460973Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals