LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra GT Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Glove Box Upper Cover Assembly.

    (Refer to Body - "CRASH PAD ")

  3. Remove the Smart Key Unit.

    (Refer to Smart Key System - "SMART KEY UNIT ")

  4. Remove the body control module (A) after loosening the mounting nuts and screw.
    G13035646Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the body control module (B) after disconnecting the connector (A).
    G13035647Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals