LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Tucson Limited, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    G13035029Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals