Repair Procedures: Replacement
- Disconnect the Battery Negative Cable from the Battery and then wait for at least 30 seconds.
- Turn the Steering Wheel so that the front wheels can face straight ahead.
- Remove the Airbag Module.
- Remove the DAB Module.
- Disconnect the Airbag Connector (A).
- Disconnect the Horn Connector (B).
- Remove the clip (C).
- Loosen the steering wheel lock bolt properly. Separate the steering wheel by using SST (09561-11001).
Tightening Torque:
39.2 ~ 49.0 N.m (4.0 ~ 5.0 kgf.m, 28.9 ~ 36.2 lb-ft)
- Loosen the steering wheel lock bolt completely, remove the steering wheel.
- Installation is the reverse of the removal.