LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Santa Fe SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - 2.0L) >> Injector >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the injector connector.
  3. Measure resistance between the injector terminals 1 and 2.
    G12991981Courtesy of HYUNDAI MOTOR AMERICA
  4. Check that the resistance is within the specification.

    Specification  : 1.18 - 1.31 [20°C (68°F)]

scientia non olet · About LEMON Manuals