Repair Procedures: Removal
- Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
- Remove the rear seat cushion.
(Refer to Body - "REAR SEAT ASSEMBLY ")
- Remove the rear seat LH air duct (A) after loosening the mounting nuts.
- Remove the fuel pump service cover (A) after loosening the mounting screws.
- Disconnect the fuel pump control module connector (A) and fuel pressure sensor connector (B).
- Disconnect fuel feed tube quick-connector (C).
- Remove the locking ring (A) by using the special service tool [No.: 09310-B8100].
- Remove the fuel pump from the fuel tank.