LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 2.4L >> Battery Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF.
  2. Disconnect the negative (-) battery terminal (A).

    Battery (-) terminal tightening nut  :

    8.0 - 10.0 N.m (0.8 - 1.0 kgf.m, 5.9 - 7.3 lb-ft)

  3. Disconnect the battery sensor connector (A).
  4. Remove the battery sensor after loosening the sensor cable flange mounting bolts (B).

    Battery sensor cable flange mounting bolt (Chassis ground)  :

    27.0 - 35.0 N.m (2.7 - 3.5 kgf.m, 19.9 - 25.8 lb-ft)

scientia non olet · About LEMON Manuals