Repair Procedures: Installation

Install in the reverse order of removal.
NOTE:
- For a vehicle equipped with a battery sensor, be careful not to damage the battery sensor when replacing or recharging the battery.
1. When replacing the battery, the new battery should be of the same type, capacity and brand as the original battery on the vehicle. If a battery of a different type is installed, the battery sensor may recognize the battery as abnormal.
2. When installing the ground cable on the negative post of battery, tighten the clamp to the specified torque. An excessive tightening torque can damage the PCB internal circuit and the battery terminal.
3. When recharging the battery, ground the negative terminal of the booster battery to the vehicle body.